Tantrum Audio

Preface

Covers Omnissiah v0.1.5

All chapters

NEXUS speaker processor and switcher. This edition covers firmware 0.0.23 and Omnissiah 0.1.5.

About this manual

The manual covers the NEXUS hardware and the parts of the Omnissiah app that belong to NEXUS: connecting it, measuring your room, applying a correction, routing sources and setting up the outputs.

If you only read one chapter, read Chapter 3 — Quick start. The quick start takes you from an unopened box to a corrected system, including where to put the microphone.

Omnissiah has its own manual at tantrumaudio.co.uk/usermanuals/omnissiah. Where a topic is the same for every Tantrum device (the EQ editor, reading results in depth, target curves, backups), the NEXUS manual sends you there instead of repeating it.

Conventions

  • Emphasised text is a label you will see on screen, such as Calibrate or Apply to device.
  • Settings → Audio means: open Settings, then the Audio tab.
  • "Output 1-2" and "Output 3" are the names printed on the rear panel and used in the app.
Note

Text marked [TBC] is a fact still being confirmed. The fact will be filled in before the manual is final.

Tantrum Audio logo in footer
Tantrum Audio Instagram Share Widget
Tantrum Audio Facebook Share Widget

© Tantrum Audio 2026